Georgia
Sewer Lift Station and Grinder Pump Design
Design of pump stations and grinder pump systems where sewage cannot flow to the sewer by gravity.
What the work involves
When a building or development sits lower than the available sewer, an engineer designs a pumped system: a grinder pump for one building, or a lift station with a wet well, duplex pumps, controls, alarms and a force main for many. Municipal stations require redundancy, emergency power provisions and approval by the utility and often the state. Engineers also evaluate aging stations that run constantly, clog or overflow.
Local conditions we plan for
- Expansive clay soils in the Piedmont
- Hurricane and coastal flood exposure around Savannah
- Rapid suburban growth around Atlanta driving site development
- Stormwater and erosion control on red clay
Building code: 2024 IBC/IRC adopted at the state level (ICC adoption chart, April 2026).
When you need it
- Building or lots lower than the gravity sewer
- Utility requires a pump station for a development
- Existing station failing, overflowing or at capacity
- Low pressure sewer system planned for an area
Frequently asked questions
How much does sewer Lift Station and Grinder Pump Design cost?
Across the US, sewer Lift Station and Grinder Pump Design usually costs $3,000 to $150,000. Estimate. A single-home grinder pump connection plan is a few thousand dollars; a municipal or subdivision lift station is a major design project.
How long does sewer Lift Station and Grinder Pump Design take?
Plan on 2 weeks (grinder pump) to 6 months (lift station) from signed proposal to stamped deliverables, longer if a site visit, soil testing or a permit review cycle is involved.
Do I need a licensed PE for sewer Lift Station and Grinder Pump Design?
In most US jurisdictions, yes. When the work needs a permit, the plans, calculations or report usually must be sealed by a Professional Engineer licensed in the state where the project is located. Every deliverable we issue for permit is sealed that way.
How do I verify an engineer's license in Georgia?
Engineers practicing in Georgia are licensed by the Georgia Professional Engineers and Land Surveyors Board. You can confirm a license number and its status in the board's public license search before you sign a contract.
Which building code applies in Georgia?
2024 IBC/IRC adopted at the state level (ICC adoption chart, April 2026). Cities and counties can add local amendments, which is one reason to hire an engineer who works in your area.
What site problems do engineers see most in Georgia?
Common issues include expansive clay soils in the Piedmont, hurricane and coastal flood exposure around Savannah, rapid suburban growth around Atlanta driving site development and stormwater and erosion control on red clay.